Fire Rated Door Types, Materials & Pricing Guide for Dubai Buildings (2026)

If you're specifying or budgeting for fire-rated doors on a Dubai project, the compliance side — DCD approval, fire ratings, testing standards — only gets you halfway there. The other half is a practical buying decision: which material, which configuration, and what it's actually going to cost. This guide covers fire rated door types and materials from a buyer's perspective. For the regulatory side, see our DCD Requirements & Compliance guide, and for hotel/hospital-specific FD60 vs FD90 guidance, see our hotel & hospital fire door guide.

Fire Rated Door Materials: What's Actually Used in Dubai

Galvanized Steel (Metal) Fire Doors

The most common choice for Dubai commercial and industrial projects. Cold-rolled galvanized steel sheets over a laminated core, with steel stiffeners and a hemmed, mechanically interlocked construction. Steel doors handle high-traffic areas, mechanical rooms, loading docks, and stairwells well — durable, low-maintenance, and not prone to warping in Dubai's heat and humidity the way some wooden doors can be.

Wooden Fire Rated Doors

Common in hotel corridors, office interiors, and residential applications where appearance matters. Built with a fire-resistant core (mineral wool or gypsum) wrapped in veneer. Aesthetically pleasing and sound-dampening, but generally costs more than steel for an equivalent fire rating and needs more careful maintenance.

Glazed / Glass Fire Doors

Steel or aluminum-framed doors with fire-resistant glazing, used where visibility matters — stairwells, corridors, reception areas, egress routes where sightlines aid wayfinding. More expensive than a solid door of the same rating.

Single Leaf vs Double Leaf: Which Do You Need?

Single leaf fire doors suit standard openings — offices, plant rooms, individual stairwell access points. Double leaf doors are specified where the opening needs to be wider — loading areas, larger mechanical rooms, or any doorway that needs to pass equipment or furniture through. Both configurations are available with standard lever handle hardware or panic bar / exit hardware for fire exit door applications.

What Drives Fire Door Pricing

• Single vs double leaf — double leaf doors cost more due to the additional leaf, frame width, and hardware
• Fire rating — higher-rated doors (FD90, FD120) generally use thicker cores and more robust seals than FD30/FD60
• Glazing — vision panels and fire-rated glass add cost over a flush panel door
• Frame type — knockdown frame vs groove frame with kerf gasket
• Hardware — standard lever handle vs panic bar / exit device, plus closers and seals
• Finish — standard RAL colors vs metallic or special RAL finishes (typically charged additionally)

As a reference point, Merac Dubai's standard galvanized steel single leaf fire door (DCD-approved, lever handle) starts from AED 3,600, and the double leaf version from AED 4,800 — see current fire rated door pricing and specifications. Final pricing depends on size, glazing, and hardware selection.

Choosing the Right Fire Door for Your Project

The right choice depends on where the door sits in your building's fire strategy: a plant room or loading dock rarely needs anything beyond a standard steel flush door, while a hotel guest corridor or hospital patient wing typically calls for a higher-spec door with closer attention to hardware and finish. If you're unsure which rating or configuration your project needs, DCD-approved drawings from your fire consultant will specify it — we can match products to those specifications directly.

Get a Fire Door Quote

Merac Dubai supplies and installs galvanized steel fire rated doors and fire exit doors across Dubai and the UAE, manufacturer-certified with DCD approval obtained per project. Browse our fire rated door range or contact us with your specifications for a project quote.

📞 Call or WhatsApp Merac Dubai for fire door pricing and DCD-compliant installation.